Sales & Marketing,marketing management,
Information and Communications,
Customer Service,
Environmental Cleaning,
Personal Services,
Building and Construction,
Workplace Safety and Health
About the course:Rigger and Signalmen Course is aimed at providing participants with the necessary knowledge and skills to ensure a safe and proper slinging and control maneuver for lifting of materials and equipment.Legal Requirement:Any person operating a crane shall not hoist any load unless he has received a clear signal from a signalman No person shall be appointed as a signalman unless he ha...
Provider: ABSOLUTE KINETICS CONSULTANCY PTE LTD
Under the WSH Act 2006 (Scaffolds) Regulations: “The scaffold supervisor shall be a person who has undergone a course of training approved by the Commissioner” – Regulation 6(1). This course of training is the “Supervision of Metal Scaffold Erection Course”. Upon completion of the course, participants will be able to identify and clearly explain the following:Material Requirements for sc...
Provider: GREENSAFE INTERNATIONAL PTE. LTD.
Syllabus▸ Principles and Practices of First Aid ▸ First Aid Requirements in WSH Act▸ Wounds, Bleeding and Shock▸ Fractures and Soft Tissue Injuries▸ Handling and Transportation of the injured▸ Cardio Pulmonary Resuscitation (CPR) and Automated External Defibrillation (AED) ▸ Breathing Difficulties▸ The Unconscious Patient▸ Occupational Eye Injuries▸ Burn Injuries▸ I...
Provider: MHI TRAINING MASTER
The purpose of the course is to provide course participants with the requisite work at height (WAH) knowledge to manage working at height activities, so that they are carried out properly and safely. This is in compliance with WSH (Work At Height) Regulations 2013 which states “It shall be the duty of the responsible person of any person who carries out or is to carry out any work at height to e...
Provider: KBA TRAINING CENTRE PTE. LTD.
About the course:8 SDU points applicable.Course contents1.Selection of MEWP and Risk Assessments 2.Safety requirements related to MEWP. 3.Pre operational inspection. 4.State factors affecting stability. 5.Conduct workplace inspection. 6.State functions of all MEWPs controls, including emergency controls and emergency procedures. 7.Identify common hazards during travelling, setup, operation and par...
Technical,Repair and Maintenance,Workplace Safety and Health
This 4 days course aims to cover all aspects of Air & Saturation diving methods & procedures. Participants will receive an overview of the reasoning & methodology behind the planning and execution of a professional offshore diving operation.COURSE OBJECTIVESTo enable participants to be conversant & have a better understanding of working with divers & the latest diving technique...
This course is designed to meet or exceed the minimum standard for working at height training for a fall prevention equipment inspector (competent person), as required by regulation 12 of WSH (Work At Height) regulations 2013. It teaches the Fall Prevention Equipment inspector to understand the specific legal duties which apply to an inspector and carry out detailed inspection a range of key fall ...
The course aims to give guidance and practical knowledge in identifying and complying with work processes and work activities where workplace safety and health policies and procedures are applicable and necessary. In addition, the participants will be equipped with technical know-how to develop and implement safe work procedures and practices including risk assessments with regards to legal requir...
Provider: Service Quality Centre
Hotel & Accommodation
This unit aims to equip the learner with the knowledge and application skills in following food and beverage safety and hygiene policies and procedures and be able to apply them to the workplace Competency Elements• Practising good personal hygiene• Using safe ingredients• Handling food safely• Storing food safely• Maintaining cleanliness of utensils, equipm...
Provider: GUILFORD TRAINING CENTRE PTE LTD
On completion of this unit, participants will have the knowledge and application skills to carry out hazard identification and risk assessment, comply with the safety and health management system, co-ordinate a permit-to-work system, and carry out safety inspections and investigationsThe total training duration is 32 hours.(29 hours of lecture, case studies, role plays, and 3 hours of assessment)W...
Provider: Institute of Process Industry (IPI) - A Division of ASPRI
Productivity & Innovation
This training shall provide participants with the knowledge and experience needed to fulfil their role as a fully trained Auditor/Lead Auditor. This course is certified by the International Register of Certificated Auditors (IRCA) and meets the training requirement for certification of auditors under the IRCA Occupational Health and Safety Management Systems Auditor Certification Schemes. ...
Provider: NEVILLE-CLARKE (SINGAPORE) PTE LIMITED
3-day IRCA Registered OH&S Management Systems Auditor Conversion Training This course is accredited by IRCA under SEQM Ltd, UK (A17015). It is applicable for QMS / EMS auditors who wish to conduct OH&S management system audits. Participants successfully completed this course may apply for all grade of OHSMS Auditor Certification Schemes.
Provider: EQS ASIA PTE LTD
construction,Workplace Safety and Health
KBA Training Centre Pte Ltd has been invited to pilot the NEW NEBOSH International Construction Certificate. This is a very exciting development and we want you to be a part of this. The Pilot course will be offered at a highly reduced course fee.Work in the construction industry can be a very rewarding profession. The world economy is heavily influenced by construction activities and almost every...
Education and Training
This course will help students to understand the role of personal fitness trainer. This course also helps the students to understand the health and safety of a client. .Students who have successfully completed all six modules will be awarded USSA Certificate of Completion for Personal Training.DurationThe course may be completed in 8weeks (40 hours) .Assessment MethodsStudents will sit...
Provider: INTERNATIONAL SPORTS ACADEMY (S) PTE. LTD.
Course Objectives This intensive one day course outlines the environmental legal requirements and related standards and codes of practice in Singapore. It aims to equip participants with a knowledge and understanding of the legislative framework and current environmental legislation.
1. Legal Requirements for WAH (Workplace Safety and Health Act; Draft WSH (WAH) Regulations; WSH (GP), WSH (Con), WSH (SSR),WSH (RM) Regulations; Code of Practice Working Safely at Height) 2. Roles and responsibilities (Manager / Assessor / Supervisor / Worker / Person-at-worker) 3. Hazard Identification and Risk Assessment (Principle of Hierarchy of control; Hazard identification of typical unsaf...
Provider: KB ACCESS PTE. LTD.
Provider: AAT TRAINING HUB PTE. LTD.
Work at Height course for Supervisors is to provide participants with the requisite Work At Height Knowledge so that they can perform their WAH activities properly and safely.At the end of the course, the participants shall be able to:Identify relevant Workplace Safety & Health (WSH) legislations / ACOP/ SS applicable to WAH and roles and responsibilitiesConduct risk assessment for WAH and imp...
Aerospace
To ensure and improve the safety, reliability and efficiency of aircraft the manufacturers or other approved design organizations continuously direct or propose implementation of modifications or repairs to the original product.In addition, new technologies are implemented which where not part of the initial training of the personnel.You want to keep your staff up to date on the equipment and modi...
Provider: Lufthansa Technical Training GmbH Singapore Branch
Building and Construction