-
SAFE PRIME MOVER DRIVING IN THE PORT
At the end of the course, participants would be able to drive prime movers safely inside PSAs Container Terminals ...
Provider: PSA CORPORATION LIMITED
-
-
SAFETY COMMITTEE REPRESENTATIVES COURSE (IMCA SEL 035)
The course is based on the IMCA SEL 035 document to provide the marine industry with in-depth knowledge of all relevant legislation and an overview of how it all fits together which will enable the safety committee representative to do a better job and provide them with certification upon course completion.
COURSE CONTENT
- Provider: KBA TRAINING CENTRE PTE. LTD.
-
SAFETY COURSE FOR SHIP SUPPLIERS PERSONNEL COURSE
TO ENABLE SHIP SUPPLIER PERSONNEL TO WORK SAFELY IN PSA'S TERMINALS...
Provider: PSA CORPORATION LIMITED
-
SAFETY INSTRUCTION COURSE FOR SHIP-REPAIR MANAGERS (ASMI Member)
COURSE OBJECTIVE
To provide participants with knowledge on the legal requirements, roles and responsibilities of a Ship Repair Manager, importance of WSH and how to establish and implement RM programmes and WSH Management Systems.
FOR WHOM
Ship Repair Managers, Project Engineers, and Project Managers working in the Shipbuilding and Ship Repa...
-
SAFETY INSTRUCTION COURSE FOR SHIPREPAIR MANAGERS
no description ...
Provider: ABSOLUTE KINETICS CONSULTANCY PTE LTD
-
SAFETY INSTRUCTION COURSE FOR SHIPYARD WORKERS GENERAL TRADE (ENGLISH)
COURSE OBJECTIVE
To provide participants with basic safety knowledge of working in shipyards including potential hazards and safe practices at work as well as workers’ basic legal employment rights.
FOR WHOM
Any worker that is going to work in the shipyard...
-
SAFETY ORIENTATION COURSE (TUNNELLING) FOR WORKERS
About the course:
By the end of the course, participants would be able to recognize common safety and health and hazards and take the necessary preventive measures to avoid injuries and diseases while working in tunnels.
Legal Requirement:
All workers must undergo a Safety Orientation Course (Tunneling) before they are allowed to work i...
Provider: ABSOLUTE KINETICS CONSULTANCY PTE LTD
-
SAFETY ORIENTATION COURSE FOR WORKERS (METALWORKING)
Course Objectives:
By the end of the course, the participants would be familiar with the common safety and health hazards in the metalworking industry and the measures to prevent accidents, injuries and diseases in the industry.
For Whom:
Workers from the metaling industry
Course Contents:
• Employee’s obligatio...
Provider: HONG TECH CONSULTANT PTE LTD
-
SAFETY ORIENTATION COURSE FOR WORKERS - METALWORKING
At the end of the course, participants will be able to: Recognise their roles and duties in construction works Implement safety measures and work procedures English: CRS-N-0018589...
Provider: NTUC LEARNINGHUB PTE. LTD.
-
SAFETY ORIENTATION COURSE FOR WORKERS - METALWORKING (BENGALI)
At the end of the course, participants will be able to: Recognise their roles and duties in construction works Implement safety measures and work procedures Bengali: CRS-N-0026026...
Provider: NTUC LEARNINGHUB PTE. LTD.
-
SAFETY ORIENTATION COURSE FOR WORKERS - METALWORKING (Chinese)
At the end of the course, participants will be able to: Recognise their roles and duties in construction works Implement safety measures and work procedures Chinese: CRS-N-0018590...
Provider: NTUC LEARNINGHUB PTE. LTD.
-
SAFETY ORIENTATION COURSE FOR WORKERS - METALWORKING (MALAY)
At the end of the course, participants will be able to: Recognise their roles and duties in construction works Implement safety measures and work procedures Malay: CRS-N-0026023...
Provider: NTUC LEARNINGHUB PTE. LTD.
-
SAFETY ORIENTATION COURSE FOR WORKERS - METALWORKING (TAMIL)
At the end of the course, participants will be able to: Recognise their roles and duties in construction works Implement safety measures and work procedures Tamil: CRS-N-0026024...
Provider: NTUC LEARNINGHUB PTE. LTD.
-
SAFETY SUPERVISOR
At the end of successful completion of the course, participants should have a good grounding of ship and wharf safety knowledge and skills, which should enable them to perform effectively as Safety Supervisors....
Provider: PSA CORPORATION LIMITED
-
SALES and NEGOTIATION SKILLS
Course Description
Negotiate and close sales like a pro.
Learn where to look for quality prospects who will buy from you. See your selling process from the customers' point of view, so that you know how to present your product/services in the way customers want to see and hear...
Provider: Apcot International Pte Ltd
-
SAMPLING AND MONITORING OF AIRBORNE CONTAMINANTS
Page doesn't load...
Provider: National Environment Agency
-
SAR66-A-M11 Aeroplane Aerodynamics, Structures And Systems
To provide a basic knowledge in aeroplane aerodynamics, airframe structures and systems (mechanical/electrical) as well as an awareness of avionic systems. The scope of coverage of the subject matter will prepare learners for the CAAS SAR66 Cat A examination (Module 11A paper)....
Provider: SIA ENGINEERING COMPANY LIMITED
-
SAR66-A-M15 Gas Turbine Engine
To provide a basic knowledge in gas turbine engine including Auxiliary Power Units. The scope of coverage of the subject matter will prepare learners for the CAAS SAR66 Cat A examination (Module 15 paper)....
Provider: SIA ENGINEERING COMPANY LIMITED
-
-
-
SAR66-A-M5 Digital Techniques / Electronic Instrument Systems
To provide a basic knowledge in Digital Techniques / Electronic Instrument Systems. The scope of coverage of the subject matter will prepare learners for the CAAS SAR66 Cat A examination (Module 5 paper)....
Provider: SIA ENGINEERING COMPANY LIMITED
-
SAR66-A-M6 Materials and Hardware
To provide a basic knowledge in materials and hardware used in the aviation industry. The scope of coverage of the subject matter will prepare learners for the CAAS SAR66 Cat A examination (Module 6 paper)....
Provider: SIA ENGINEERING COMPANY LIMITED
-
-
-
SAR66-B1/B2-M09 HUMAN FACTORS
Content 1. General The need to take human factors into account; Incidents attributable to human factors/human error; Murphys law. 2. Human Performance and Limitations Vision; Hearing; Information processing; Attention and perception; Memory; Claustrophobia and physical access. 3...
Provider: MIL-COM AEROSPACE TRAINING CENTER
-
SAR66-B1/B2-M10 AVIATION LEGISLATION
Basic & Maintenance Training COURSE LIST SAR-66 MODULES FOR CATEGORY A / B1 / B2 / NON_CERTIFYING TECHNICIANS M1 - Mathematics M2 - Physics M3 - Electrical Fundamentals M4 - Electronic Fundamentals M5 - Digital Techniques M6 - Materials & Hardware M7 - Maintenance Practices M8 - Basic Aerodynamics M9 - Human Factors M10 - Aviation Legislation M11 - Aeroplane Aerodynamics, Struct...
Provider: SIA ENGINEERING COMPANY LIMITED
-
SAR66-B1/B2-M9 HUMAN FACTORS
Basic & Maintenance Training COURSE LIST SAR-66 MODULES FOR CATEGORY A / B1 / B2 / NON_CERTIFYING TECHNICIANS M1 - Mathematics M2 - Physics M3 - Electrical Fundamentals M4 - Electronic Fundamentals M5 - Digital Techniques M6 - Materials & Hardware M7 - Maintenance Practices M8 - Basic Aerodynamics M9 - Human Factors M10 - Aviation Legislation M11 - Aeroplane Aerodynamics, Struct...
Provider: SIA ENGINEERING COMPANY LIMITED
-
-
SCDF Hazmat Transport Driver Permit Course
This course is designed to train drivers who are involved in the transportation and handling of hazardous materials. At the end of the course, participants will be able to:
- Explain the 9 classes of hazardous substances and their identification
- Provider: HAZMAT TRAINING
- Explain the 9 classes of hazardous substances and their identification
