Sales & Marketing,marketing management,
Information and Communications,
Customer Service,
Healthcare,
Personal Services,
Building and Construction,
Workplace Safety and Health
Course Contents:1.Course Overview and requirements.2.Selection of MEWP and Risk Assessments3.Safety requirements related to MEWP.4.Pre operational inspection.5.Functions of all MEWPs controls6.Methods of safe operations and hazard identification.7.Theory test8.Practical training9.Practical assessment.SDF and Absentee payroll is available. Please be informed that full course fee is payable to servi...
Provider: ABSOLUTE KINETICS CONSULTANCY PTE LTD
Duration: 4 hours (including 15 mins MCQ assessment)Attendance: 100%Pass Criteria: Attendance 100%, Assessment 60%Course Medium: EnglishCourse OverviewSOCT is a mandatory WSH training course for all workers designated for tunnelling work. This course aims equip workers with the knowledge to recognise common safety and health hazards and take necessary preventive measures to avoid injuries and dise...
Provider: AVANTA GLOBAL PTE. LTD.
About the course:15 SDU points awarded.SDF: For all the courses commencing from 1st July 2013, we will bill the full course fee. Customers are required to apply and claim SDF directly from WDA. Please refer to below website for information on funding amount and more. http://www.skillsconnect.gov.sg/web/guest/home. SDF course code: CRS N 0001170This course is to train persons (construction sit...
Have a better understanding of the leaning gaps faced by the SDOH students 1. Have additional knowledge and information on the principles and practices of occupational hygiene 2. Apply learning from this TTT course to increase individual capacity as an adult educator for SDOH courses related to chemical and biological hazards and 3. Develop an awareness of the learning steps required to facilitate...
Provider: QUESH CONSULTANTS (PTE.) LTD.
Repair and Maintenance
This 3-full day classroom-based highly interactive course which will equip participants with the knowledge and skills required to improve in their efficiency and effectiveness at work. This workshop will be conducted by our highly experienced and motivated trainer using a combination of lectures, group discussions, case studies, exercises. Participants will deepen their understan...
Provider: JFAM SYNERGY (PTE.) LIMITED
This course is recommended for personnel who wish to fulfil both the supervisory and managerial roles.Duration: 12.5 hours (including 2.5 hours of assessment)Attendance Criteria: 100%Pass Criteria: 70%Course Medium: EnglishEntry RequirementsEmployability Skills System (ESS) Workplace Literacy and Numeracy (WPLN) Level 6 and above or equivalentAbility to carry out hazards identification, risk asses...
Legal requirementWorkplace Safety and Health (Operation of Cranes) Regulations 2011 stipulates that:It shall be the duty of the responsible person:Not to appoint any person as a Rigger and /or Signalman unless the person is one who has successfully completed a training course acceptable to the commissioner to equip him to be a Signalman.For whomThe course would be appropriate for individuals assig...
Provider: AUGUST INTERNATIONAL PTE. LTD.
Process and Product Engineering
This course was formerly called oil/petrochemical safety orientation course for supervisors. The WSQ supervise workplace safety and health in process plant is one of the core units in all process sectors of process. 1. Identify hazards and control measures 2. Comply with safety and health legislations, guidelines and code of practice and provide input for risk assessment 3. Carry out and comply wi...
OVERVIEW OF THE COURSE REQUIREMENTS Learning objectives:Identify the Workplace Safety and Health Act, subsidiary legislation and industrial code of practice relevant to the marine industryList the roles and responsibilities of a shipyard supervisorConduct a safety briefing for shipyard workers and contractorsCoordinate the implementation of safe work procedures in the marine industryProvide input...
COURSE OBJECTIVES• Maintaining safe work environment• Using proper lifting, pushing and pulling techniques• Using equipment safely• Following directions for handling hazardous materialsThe course will be conducted in English.ADMISSION CRITERIA• Able to speak, read and write simple English (ESS WPLN Level 4)• No other pre-requisitesDURATION• 16 hours (9am to 6 pm over 2 days)ASSESSMEN...
Provider: ASCENDO CONSULTING PTE. LTD.
At the end of the course, participants would gain the knowledge and skills to tie the load for safe lifting by any form of lifting equipment using correct and clear signals to guide the crane operators to manoeuvring of a load safely to its destination
Provider: PSA CORPORATION LIMITED
Food and Beverages
This course aims to equip participants with the basic skills of food preparation in the culinary scene. Participants knowledge would be enhanced with training designed to educate participants on several key areas such as preparing mise-en- place, maintaining food and beverage production environment, F&B safety and hygiene policies and procedures, quality control procedures and ensuring a safe an...
Provider: EDUQUEST INTERNATIONAL INSTITUTE PTE. LTD.
Identify the Workplace Safety and Health Act, subsidiary legislation and industrial code of practice relevant to the marine industry List the roles and responsibilities of a shipyard supervisor Conduct a safety briefing for shipyard workers and contractors Coordinate the implementation of safe work procedures in the marine industry Provide inputs for drawing up a risk assessment matrix Formulate o...
Provider: STEP UP TRAINING PTE. LTD.
About the course:32 SDU points awarded.SDF: For all the courses commencing from 1st July 2013, we will bill the full course fee. Customers are required to apply and claim SDF directly from WDA. Please refer to below website for information on funding amount and more. http://www.skillsconnect.gov.sg/web/guest/home. SDF course code: CRS N 0000904This course is to train persons (construction sit...
Personal Services
Objective: This course equips you with the relevant skills and knowledge in becoming a professional hairstylist and a salon owner. Course Pre-requisite: GCE N Levels, 16 years and above / Adult learners with experience in the work placeRecognition of Prior LearningThose who have already successfully completed the Professional Diploma Level 1 or Level 2 courses are eligible ...
Provider: KIMARIE HAIR & BEAUTY TRAINING CENTRE PTE LTD
About the course:Riggers Course is aimed at providing participants with the necessary knowledge and skills to ensure a safe and proper slinging and control maneuver for lifting of materials and equipment.Legal Requirement:No person shall rig up loads for any lifting operation by a mobile crane or tower crane unless he is a rigger appointed by an occupier. No person shall be appointed as a rigger u...
Course Outline for the WDA WSQ Perform Work in Confined Space Operation are Identify duties and responsibilities of all personnel involved in confined space work under the WSH Legislations and Code of Practice. Identify confined space hazards Use Gas Detection Instruments for atmospheric monitoring Comply with Permit-to-Work system and safe work procedures when working in confined space Participa...
Provider: SIMPLY SAFETY PTE. LTD.
Course Content Comply with Workplace Safety & Health Policies and Procedures Follow safe work practices and risk control procedures Follow workplace emergency response procedures Participate in workplace safety and health management activities Promote WSH Culture Development Support and monitor WSH culture development Identify organisational WSH culture Minimise WSH violations and errors by ind...
Provider: GREENSAFE INTERNATIONAL PTE. LTD.
1. Legal Requirements for WAH (Workplace Safety and Health Act; Draft WSH (WAH) Regulations; WSH (GP), WSH (Con), WSH (SSR),WSH (RM) Regulations; Code of Practice Working Safely at Height) 2. Roles and responsibilities (Manager / Assessor / Supervisor / Worker / Person-at-worker) 3. Hazard Identification and Risk Assessment (Principle of Hierarchy of control; Hazard identification of typical unsaf...
Provider: KB ACCESS PTE. LTD.
Course Outline for WDA WSQ Supervise Work in Confined Space Operation Identify duties and responsibilities of a Confined Space Supervisor under the WSH legislations and Codes of Practice. Identify, prevent and control confined space hazards Carry out and comply with the requirements of Confined Space Entry Permit System using a systematic approach Apply Gas Detection Instruments and other control...