Sales & Marketing,marketing management,
Information and Communications,
Customer Service,
Environmental Cleaning,
Personal Services,
Building and Construction,
Manufacturing
Learners will be able to listen, read, speak and write English at a proficiency level equivalent to the employability skills system. Identify duties and responsibilities of all personnel involved in confined space work under the WSH Legislations and code of practice. Identify confined space hazards. Use gas detection instruments for atmospheric mmonitoring. Comply with permit to work system an...
Provider: QUESH CONSULTANTS (PTE.) LTD.
Workplace Safety and Health
The Rigger and Signalman Course is aimed at providing individuals with the knowledge and skills to prepare and to secure the load for safe lifting, lifting equipment and use of correct and clear signals to guide the crane operator in the manoeuvering of a load safely. This is a mandatory course in line with Workplace Safety and Health (Operation of Cranes) Regulations. The training will be held at...
Provider: KBA TRAINING CENTRE PTE. LTD.
Course DescriptionDo you know that workplace traffic management is important for many industrial sectors. There have been numerous incidents involving workplace incidents involving pedestrians, work vehicle movements, driving on public road and within workplace and site ; effective workplace traffic management plans is the key to preventing unnecessary accidents.What will this course cover?Introdu...
Provider: ADVANCE SAFE CONSULTANTS PTE. LTD.
Follow safe work practices and risk control procedures. Participate in workplace safety and health management activities. Follow workplace emergency response procedures
Provider: JUNE FLORAL ART SCHOOL PTE. LTD.
Transportation and Storage
This component consists of a 8 hours theory lesson and 1 hour written test. Note: Participant who failed the written test has to attend the theory lesson and written test (WSQ-OLCTLT) and pass the written test before proceeding to practical test. Not applicable for SDF/SRP grant
Provider: TAT HONG TRAINING SERVICES PTE LTD
“Starting from 1st October 2009, WSQ “Operate Forklift” Competency Standard has replaced the previous Forklift Course which ceased to run on 30th September 2009”. The new WSQ “Operate Forklift” Competency Standard was developed by the industry and facilitated by WDA, MOM and WSHC. This industry-endorsed standard provides a competency-based approach to train forklift operators. Partici...
Course Contents The Competency Unit (CU) "Operate Forklift" applies to operating forklift in various environment conditions and it covers the Competency Elements (CE) as listed below: Introduction to WSQ FrameworkIntroduction to WSQ Framework CE1 : Prepare to Carry Out Forklift Operations CE2 : Inspection of Forklift CE3 : Carrying Out Forklift Operations CE4 : Reinstate and Handover Forklif...
Course Outline for the WDA WSQ Perform Work in Confined Space Operation are Identify duties and responsibilities of all personnel involved in confined space work under the WSH Legislations and Code of Practice. Identify confined space hazards Use Gas Detection Instruments for atmospheric monitoring Comply with Permit-to-Work system and safe work procedures when working in confined space Participa...
Provider: SIMPLY SAFETY PTE. LTD.
Identify the Workplace Safety and Health Act/ Regulations/ Approved Codes of Practice/ Singapore Standards relevant to Work At Height Recognize risk assessment methods on relevant to Work At Height hazards Follow organizational preventive measures relevant to Work At Height Use and Care for fall prevention systems and equipments Follow workplace Fall Protectio...
50% of the course focuses on the practical aspect of slinging and lifting operations; the remaining 50% will be classroom lectures, teaching them the legal requirements, roles and duties as a Rigger. Roles and Responsibilities of a Rigger Toolbox Meeting Estimating Load and Centre of Gravity Pre-lift Inspection of Crane and Lifting Gear and Accessories Selection and Use of Rigging Equipment ...
This is an Operations level core unit of 2 credits. On completion of this unit,participants will have the knowledge and application skills in maintaining safe & secure working environment and be able to apply them to the workplace.
Provider: WILLIAM ANGLISS INSTITUTE PTE. LTD.
INTRODUCTION WSH (Construction) Regulations 2007 Clause 9(2b) stipulates that: No person shall be employed to oversee or supervise any work or process carried out in a worksite unless the person has received adequate safety and health training for the purpose of ensuring that such work or process can be carried out safely. LEARNING OUTCOMES By the end of the course, participants will be compet...
Provider: SAFETECH TRAINING SERVICES PRIVATE LIMITED
Target Audience:The course would be appropriate for individuals with job titles such as: Line Managers, Lifting Supervisor and ForemanCourse Overview:The SSIC is a mandatory WSH training course for all workers working in the shipbuilding and ship repairing industry.Shipyard workers are required to go through the SSIC before they start work at the shipyard. The Workplace Safety and Health (Shipbuil...
Provider: ARK HSE MANAGEMENT SOLUTIONS PTE. LTD.
Technical,Repair and Maintenance
KBA Training (KBAT) is pleased to host an upcoming 'High Voltage Safety Awareness' course that is conducted by MTCS Services (Asia Pacific) Ltd. The training will be held in Singapore whereby MTCS will be utilising KBAT classroom and training facility. This expands our Commercial Diving portfolio for competency development trainingMTCS Ltd is a fully accredited training centre and their courses me...
Course duration(4 hours)conducted at your company premises.Course DescriptionWith the extension of the Workplace Safety and Health (WSH) Act, the WSH Act has now covered all workplaces including administrative offices and other non hands on premises. Risk Assessment and hazard control has become mandatory for all sectors by understanding good safety practices is the only way to ensure ...
At the end of the course, participants will be able to: Recognise the common safety hazards at construction site Know the preventive measures to be adopted Condident in working at height Understand the importance of observing safety signs and safe work procedures Know their rights and responsibilities
Provider: NTUC LEARNINGHUB PTE. LTD.
This course is designed to assist supervisors understand the fundamentals of height safety and applying work techniques that is reasonably practicable to ensure their safety when working at height. Comprising of both the theoretical and practical aspects, the 1.5 day course will bring supervisors through a wide range of topics. These range from Fall Protection System to Equipments to Risk Asses...
Provider: QMT INDUSTRIAL & SAFETY PTE LTD
On completion of this unit, the learner will have the knowledge and be equipped with the application skills in basic principles in working within/around confined space.
Supervise work in confined space operation is one of the core units in all process sectors of process industry. It specifies the skills and knowledge required by people to supervise work in confined space operation.