Sales & Marketing,marketing management,
Information and Communications,
Customer Service,
Environmental Cleaning,
Personal Services,
Building and Construction,
Workplace Safety and Health
On 5 February, at the bizSAFE Convention 2015 themed “A Safer and Healthier Workplace for Everyone”, Minister for Manpower Mr Tan Chuan-Jin announced that the national workplace fatal injury rate for 2014 has been reduced to 1.8 per 100,000 employees from 2.3 in 2013. He highlighted that while the WSH 2018 target has been met, 60 lives were still lost at work last year and one life lost is one...
Provider: INFINITE ACADEMY PTE. LTD.
Engineering
In order to ensure that your manufacturing environment is stable, you need to implement an SPC system and measurement studies for your projects. Through adopting MSA techniques, you can then ensure the continued capability and effectiveness of your manufacturing system. Our SPS and MSA course trains your personnel to analyze your manufacturing system and enhance effectiveness.
Provider: SGS INTERNATIONAL CERTIFICATION SERVICES SINGAPORE PTE LTD
Provider: Institute of Technical Education
Covers broad-based foundational knowledge in OH subjects and all the manjor hazards
Provider: Singapore Polytechnic
1. Assess the risks related to a range of chemicals and biological control agents used in the landscape industry sectors 2. Apply safety procedures to the storage, handling and transportation of a range of chemicals and biological control agents 3. Demonstrate the decanting and mixing of chemicals and biological control agents 4. Supervise the selection and application of the chemical or biologica...
Provider: Centre For Urban Greenery And Ecology
Course Overview:Identify the Workplace Safety and Health Act/ Regulations/ Approved Codes of Practice/ Singapore Standards relevant to Work At HeightRecognise risk assessment methods relevant to Work At Height hazards Follow organisational preventive measures relevant to Work At HeightUse and Care for fall prevention systems and equipmentsFollow workplace Fall Protection Plan in accordance wi...
Provider: ACHIEVE SAFETY TRAINING PTE. LTD.
Personal Services
Shampoo and Condition the Hair and Scalp Cut Women’s Hair The Art of Dressing Hair Colour and Lighten Hair Client Consultation for Hair Services Follow Health and Safety Practice in the Salon Salon Reception Duties Display Stock to Promote Sales in a Salon Working in the Hair Industry
Provider: SPATEC ACADEMY PTE. LTD.
Legal RequirementThe following parties related to/in the process industry should attend this course: • Confined Space Entrant • Confined Space AttendantCourse Objective1. Understanding of WSH (Construction) Regulation and WSH (Confined Space) Regulation pertaining to Work in Confined Space2. Understand the Duties and Responsibilities of all personnel involved in Confined Space works (Entrant, ...
Provider: KB INDUSTRIAL TRAINING CENTRE PTE. LTD.
PROVIDE AND MAINTAIN A SAFE ENVIRONMENT.
Provider: BOX HILL INSTITUTE SINGAPORE PTE. LTD.
This is an Operations level core unit of 1 credit. On completion of this unit, participants will have the knowledge and application skills in working safely and be able to apply them to the workplace.
Provider: WILLIAM ANGLISS INSTITUTE PTE. LTD.
About the course:21 SDU points awarded. Course Contents:1.Identify duties and responsibilities of a Confined Space Supervisor under the WSH legislations and Codes of Practice2.Identify, prevent and control confined space hazards3.Carry out and comply with the requirements of the Confined Space Entry Permit System using a systematic approach4.Apply Gas Detection Instruments and other control measur...
Provider: ABSOLUTE KINETICS CONSULTANCY PTE LTD
Under the WSH Act 2006 (Scaffolds) Regulations: “The scaffold supervisor shall be a person who has undergone a course of training approved by the Commissioner” – Regulation 6(1). This course of training is the “Supervision of Metal Scaffold Erection Course”. Upon completion of the course, participants will be able to identify and clearly explain the following:Material Requirements for sc...
Provider: GREENSAFE INTERNATIONAL PTE. LTD.
Duration: 24 hours (Incl. 2 hours of assessment)Course ObjectivesThis unit of competency specifies the knowledge, skills and attitudes required of a WSH representative to identify key legal and other requirements relating to the duties and responsibilities of stakeholders, monitor legal compliance and report incidents as wellas non-compliance issues according to organizational SOP.Target Applicant...
Provider: AVANTA GLOBAL PTE. LTD.
Building and Construction
Under the Workplace Safety and Health (WSH) 2006 Act, all persons who perform metal scaffold erection in the building and construction industry must take the metal scaffold erector course and be certified to ensure safety on the job. Course Outline The course comprises of the following modules: Introduction to Metal Scaffolding Introduction to Ties and Braces Introduction to Static and Mobil...
Provider: NTUC LEARNINGHUB PTE. LTD.
Course Opening & Introduction Part 1 - Terminology and Classification of MetalScaffold Part 2 - Materials Requirement and Work PlatformFor Scaffold Part 3 - Frame System Scaffold Part 4 - Birdcage Scaffold and Ties and Braces Part 5 - Tower Scaffold and Modular Scaffold Part 6 - Suspended Scaffold and Special Scaffold Part 7 - Overview of Factories (Scaffolds) Regulations Part 8 - Scaffold Registe...
Provider: THE SINGAPORE CONTRACTORS ASSOCIATION LIMITED
Target ParticipantsAnyone who wish to have an understanding on ergonomics ObjectivesAfter the course, the participants will understand how inappropriate work postures and excessive loads on the body cause personal health problems (musculoskeletal disorders) and learn ways to eliminate or minimize the risks. They will also be given an overview of task analysis to identify bad&nb...
Provider: ACE EHS SINGAPORE PTE. LTD.
50% of the course focuses on the practical aspect of slinging and lifting operations; the remaining 50% will be classroom lectures, teaching them the legal requirements, roles and duties as a Rigger. Roles and Responsibilities of a Rigger Toolbox Meeting Estimating Load and Centre of Gravity Pre-lift Inspection of Crane and Lifting Gear and Accessories Selection and Use of Rigging Equipment ...
Provider: TAT HONG TRAINING SERVICES PTE LTD
On completion of this unit, the learner will have the knowledge and be equipped with the application skills in control noise and vibration and be able to apply them at the workplace. This includes:Apply the basic principles in noise and vibration controlProvides the fundamental knowledge and skills in noise and vibration controlTypical control measures and assessment of these control measures...
Audit/Risk Management
A safety management system provides a systematic way to identify hazards and control risks while maintaining assurance that these risk controls are effective. OHSAS 18001:2007 is the internationally recognised standard for occupational health and safety management systems.Key TopicsWhat is OHSAS 18001:2007?Review of OHSAS 18001 requirementsHazard Identification, risk assessment and determini...
Provider: LEARNERS HUB PTE. LTD.
This is an Operations level core unit of 1 credit. On completion of this unit, participants will have the knowledge and application skills in safety and security for guests and be able to apply them to the workplace.