Sales & Marketing,marketing management,
Information and Communications,
Customer Service,
Environmental Cleaning,
Personal Services,
Building and Construction,
Workplace Safety and Health
Course Content Intro Course Opening & Introduction Part 1 Legislations on Lifting Operation Part 2 Roles and Duties of Personnel in Lifting Operation Part 3 Planning for Safe Lifting Operations Part 4 Safe Use of Mobile Cranes I Part 5 Safe Use of Mobile Cranes II Part 6 Safe Use of Tower Cranes Part 7 Safe Use of Other Lifting Machines Part 8 Basic Rigging and Slinging Methods; Case Study Part 9 ...
Provider: THE SINGAPORE CONTRACTORS ASSOCIATION LIMITED
Course Content (designed for Construction Industry) ï‚· Administer WSH Policy ï‚· Coordinate Implementation of Emergency Preparedness and Response Plans (WSHP v2) ï‚· Coordinate WSH Management System with Legal Compliance ï‚· Facilitate Effective Communication and Engagement at the Workplace ï‚· Identify WSH hazards and Implement Control Measures (WSHP v2) ï‚· Investigate and Report WSH Incidents ...
Course Opening & Introduction Part 1 - Terminology and Classification of MetalScaffold Part 2 - Materials Requirement and Work PlatformFor Scaffold Part 3 - Frame System Scaffold Part 4 - Birdcage Scaffold and Ties and Braces Part 5 - Tower Scaffold and Modular Scaffold Part 6 - Suspended Scaffold and Special Scaffold Part 7 - Overview of Factories (Scaffolds) Regulations Part 8 - Scaffold Registe...
This course is recommended for personnel who wish to fulfil both the supervisory and managerial roles.Duration: 12.5 hours (including 2.5 hours of assessment)Attendance Criteria: 100%Pass Criteria: 70%Course Medium: EnglishEntry RequirementsEmployability Skills System (ESS) Workplace Literacy and Numeracy (WPLN) Level 6 and above or equivalentAbility to carry out hazards identification, risk asses...
Provider: AVANTA GLOBAL PTE. LTD.
Legal Requirement :FACTORIES (OPERATION OF CRANES) REG R20(2). No person shall be appointed as a lifting supervisor for any lifting operation by a mobile or tower crane unless he has undergone a Lifting Supervisors Safety Course approved by the Chief Inspector. For WhomThe course would be appropriate for individuals with job titles such as: Line Managers, Lifting Supervisor and Foreman A...
Provider: AUGUST INTERNATIONAL PTE. LTD.
Duration: 32 hours (including 3 hours of assessment)Pass Criteria: Attendance 75%, Assessment 65%Course Medium: EnglishTarget AudienceThe course would be appropriate for individuals who are contractors, managers and supervisors from the process industry.Entry RequirementWorkplace literacy and numeracy Level 5 under Employability Skills System (ESS) Workplace Literacy and Numeracy Level 5 or equiva...
The Standard First Aid + Cardiopulmonary Resuscitation (SFA + CPR) is a 3 day course designed to equip participants with the capability to carry out critical life saving techniques and procedures during an emergency. Participants will learn life saving techniques and procedures such as 1. Action at an Emergency 2. One Man CPR 3. Management of Traumatic Conditions such as Wounds, Blee...
Provider: LENTOR AMBULANCE PTE. LTD.
50% of the course focuses on the practical aspect of slinging and lifting operations; the remaining 50% will be classroom lectures, teaching them the legal requirements, roles and duties as a Rigger. Roles and Responsibilities of a Rigger Toolbox Meeting Estimating Load and Centre of Gravity Pre-lift Inspection of Crane and Lifting Gear and Accessories Selection and Use of Rigging Equipment ...
Provider: TAT HONG TRAINING SERVICES PTE LTD
The aim of the course is to provide course participants with the requisite WAH knowledge to supervise work at height activities so that they are carried out properly and safety. At the end of the course, participants will be able to: 1. Apply relevant Workplace Safety & Health (WSH) legislation/ approved codes of practice/ Singapore standards applicable to WAH and roles and responsibilities. 2. Ap...
Provider: PSA CORPORATION LIMITED
The aim of the course is to provide course participants with the requisite WAH knowledge to perform work at height activities so that they are carried out properly and safety. At the end of the course, participants will be able to: • Identify relevant Workplace Safety & Health (WSH) legislations / approved codes of practice / Singapore standards applicable to WAH and roles and responsibilities Â...
On completion of this course, workers will be able to handle explosive powered tools in a proper, correct and safe manner. Course Outline General Requirements of the Regulations Types of Tools, Uses, Terminology & Definitions Principles of Tool Operation Types of Charges & Fasteners Types of Base Materials (Suitable & Unsuitable) Operation & Safe Use of Tools Care & Storage of Tools And Explosi...
Provider: NTUC LEARNINGHUB PTE. LTD.
Course AimThe Work-At-Heights (WAH) Course for workers is aimed at providing individuals with the requisite WAH knowledge so that they can perform their WAH activities properly and safely. It is a mandatory course for individuals who are assigned to carry out work at height in the workplace.Learning ObjectivesIdentify relevant Workplace Safety & Health (WSH) legislation / approved code of prac...
The aim of this course is to provide course participants with the requisite WAH knowledge to manage work-at-height activities so that work is carried out properly and safely.
This childcare first aid course with theory and hands-on learning, covers important aspects of first aid and life-saving for children. This will equip participants with the skills to render first aid in emergencies at home or outside.
Provider: The National St John Council for the Republic Of Singapore
The aim of this course is to provide course participants with the requisite WAH knowledge to assess work-at-height activities so that work is carried out properly and safely.
COURSE DESCRIPTIONThis unit covers the knowledge, and skills and knowledge for management of hazardous substances at the workplace.This includes identifying the sources of hazardous substances, implementing control measures to manage the associatedrisks. Persons who successfully completed this unit of competency will be recognised as the ‘competent persons’ for thecontrol of hazardous substanc...
Provider: ASCENDO CONSULTING PTE. LTD.
The aim of the course is to provide course participants with the requisite WAH knowledge to manage and approve all work-at-height activities so that work is carried out properly and safely.
Duration: 8 hours (including 1 hour of assessment)Attendance: 100%Graded Assessment: Written questioning (1 hour) and Written AssessmentCertification: Statement of Attainment (SOA) by Workforce Development Agency (WDA)Course Medium: EnglishCourse OverviewRespond to Fire Incidents in Workplace aims to equip learners with the skills necessary to handle a relatively simple fire incident which might h...
Workplace Safety and Health,Environmental Cleaning
COURSE SYNOPSIS• This course aims to equip cleaning supervisors with the right skills to use cleaning chemicals and applyappropriate cleaning methods and processesThis unit covers the knowledge and skills required in:• Applying knowledge in the use of cleaning chemicals, methods and processes;• Reviewing effectiveness of cleaning chemicals.; and• Evaluating effectiveness of cleaning m...
Engineering
In order to ensure that your manufacturing environment is stable, you need to implement an SPC system and measurement studies for your projects. Through adopting MSA techniques, you can then ensure the continued capability and effectiveness of your manufacturing system. Our SPS and MSA course trains your personnel to analyze your manufacturing system and enhance effectiveness.
Provider: SGS INTERNATIONAL CERTIFICATION SERVICES SINGAPORE PTE LTD